When you clean the air ducts in your home, you’ll manage to reduce the dust present in the house significantly. By cleaning the ducts, you can also ensure that the HVAC system will last longer. For individuals who have allergies, duct cleaning will come in handy.

Although you don’t own a powerful vacuum cleaner and you can’t afford to hire a company that offers duct cleaning services, we’ll outline some tips on how to clean the ducts on your own. Always keep in mind there are different duct systems designs, and some of them include underground systems and attic systems. Keep in mind that you may be unable to access all parts of the duct system. For instance, with the underground ducts, you can only clean the parts that are accessible.

When cleaning the air ducts, you need the following:

  1. Vacuum – if you have a household vacuum cleaner and it has a proper hose, you can use it to conduct the duct cleaning. A heavier-duty vacuum cleaner is preferable.
  2. Furnace filter – after you’re done with duct cleaning, you’ll need to replace the furnace filter. You should choose the right filter.
  3. Brush – the brush should closely resemble a toilet brush. You can also use a paintbrush that has a stiff bristle.
  4. Paper Towels – ensure some of the registers are covered as you clean the others; this is where the paper towels come in handy. They ensure you won’t carry out a lot of sweeping and dusting.
  5. Hex driver/ screwdriver – the registers are held by fasteners, and that is why you need ten right tools for the job.

The following steps will guide you on How to Clean Your Home’s Air Ducts:

  1. The Registers Should be Covered – ensure the registers are covered (these are the openings that usually supply heated air to each room). The main reason why the registers are covered is to ensure the dust won’t reach other rooms as you clean the ducts. You should lift the register and wrap the paper towel on top of it. You will then replace it eventually.
  2. The Fan Should be Turned ON – the fan should be running as you clean the air ducts. As the fun runs, the dust you loosen as you brush and bang the air ducts will move along. When you turn the “fan ON,” you should ensure that the “heat/cool” mode has been turned OFF as the fan runs. If there is no fan-only option, you’ll run the heat. You can also install a new thermostat considering such an option will be helpful.
  3. Check the Filters – ensure the old furnace filter is in the right place such that the dust that comes about during the duct cleaning process won’t get pulled into the fan motor.
  4. The Dust in the Ducts Should be Loosened – you should knock any dust buildup in the ductwork. Use the brush to tap on the accessible parts of the ductwork. You’ll manage to break up all the dampened dust deposits that are stuck in the duct.
  5. The registers should be cleaned – you can start to clean the dust present in the supply registers. Using the vacuum cleaner, you can place the hose close to the register. You will then lift the register. The hose will catch any dust that the fan will push out. You will then sweep the dust into the piping’s register depending on how far the hose can reach out. You can use the brush to get rid of any loose dust. After that, you can get rid of the paper towels.
  6. The Air Registers Should be Cleaned  the air registers should be cleaned. There is a high likelihood that they will be fastened using screws, and you need certain tools to remove them. You should brush & sweep as far as you can.
  7. The Furnace and Fan Should be Shut Off – shut off the furnace and fan from the breaker panel. You should not just switch off the thermostat since that won’t turn off the entire unit.
  8. Return the air boot and clean out the blower– after turning off the power, you should remove the panels present at the front of the furnace. You can then access the blower compartment. Also, you should return the air boot. Use the vacuum cleaner and ensure the dust buildup has been cleaned up.
  9. The Furnace Filter Should be Replaced- when you purchase a filter, you’ll manage to cut down on the dust present in your home. The only issue is that you may have to replace the filter often, considering a dirty filter will restrict the airflow, and the blower motor will become hotter, which means the lifespan will reduce.

Besides cleaning the air ducts, you should also clean ceiling fans. After learning about how to clean your home’s air ducts, you’ll notice that the quality of the air will improve after the cleaning exercise.

Final Thoughts

We have outlined the steps to follow regarding How to Clean Your Home’s Air Ducts. By adhering to each of these steps, you’ll ensure the duct is clean. Also, you’ll notice the quality of air in your home will improve.